manualshive.com logo in svg

Panduit Atlona AT-UHD-SW-5000ED, Manual

Share
Download
Panduit Atlona AT-UHD-SW-5000ED Manual Download Page 9

AT-UHD-SW-5000ED

9

Introduction

Features

Package Contents

• 

Two, Ethernet-enabled HDBaseT Inputs 

• 

Mirrored, dual outputs on HDMI and HDBaseT

•  Automatic display control
•  Automatic input selection using hot plug detect and video detection technology
• 

Ethernet-enabled HDBaseT 

• 

EDID management and HDCP management

•  4K/UHD capability
• 

AV, Ethernet, power and control over HDBaseT

• 

TCP/IP, RS-232, and IR control

• 

Easy, GUI-based configuration using integrated web server

•  Volume controls
•  Volume setting indicator
• 

Balanced, line level output

• 

Multi-channel audio compliant

• 

Rack-mountable, 1U, half rack width enclosure

•  Works with Velocity with Integrated AMS

1 x AT-UHD-SW-5000ED

2 x 5-pin captive screw connectors

1 x 3-pin captive screw connector

1 x 2-pin captive screw connector

1 x Rack ears set, 1-long, 1 short, 2 table mount

4 x Rack ears screws 

1 x 48 V / 0.83 A DC power supply 

1 x power cord

The Atlona 

AT-UHD-SW-5000ED

 is a 5x1 switcher with two HDBaseT

™

 inputs, three HDMI inputs, mirrored HDMI 

and HDBaseT outputs, balanced audio outputs, automatic input selection, and advanced display control capability. 

The HDBaseT inputs match perfectly with the HDVS-200-TX modules to enable VGA and HDMI sources to be easily 

integrated into a system. The switcher supports 4K/UHD @ 60 Hz, 4:2:0; (10.2 Gbps). It transmits AV signals along 

with Ethernet, power, and control over a single cable to displays up to 328 feet (100 meters) from the switcher. 

Control options include automatic input selection, front-panel buttons, and compatibility with IR, RS-232, or TCP/

IP-based control systems. Displays are automatically turned on and off using CEC, IP, or RS-232. Advanced features 

also include a web-based GUI for easy set-up and management of EDID, HDCP, and display control. The switcher 

offers audio de-embedding of PCM audio over HDMI to two-channel, ba4 dBu analog audio outputs. The 

switcher is a cost-effective product for professional integration featuring a compact, 1U, half-rack width enclosure 

that is easily installed with included 19” rack-mount brackets. Two units can be mounted side-by-side.

The 

AT-UHD-SW-5000ED

 enables two HDVS transmitters to be used in a single system. With Ethernet enabled 

HDBaseT transmission to the HDVS transmitters and the receiver control, setup and maintenance is simplified. 

Automatic input selection and display control simplify the system, reducing cost, reducing setup time and resulting in 

a better end user experience.

Summary of Contents for Atlona AT-UHD-SW-5000ED































































Reviews:

No comments

Brands by name

Popular brands

Load more brands