AT-UHD-SW-5000ED
30
Device Operation
User Management
The AT-UHD-SW-5000ED allows the administrator password to be changed. The password applies to both the web
server and Telnet sessions. Note that the
Username
field cannot be changed. All users have the same level of
access to control the AT-UHD-SW-5000ED. However, only the
root
user is allowed to manage other users. Up to
three additional users can be created.
1.
Login to the web server. Refer to
Introduction to the Web Server (page 38)
. The default username and
password are listed below:
Username:
root
Password:
Atlona
2. Click
Config
in the menu bar.
3. Click the
Password
field and enter the current password.
4. Under the
New user name and password
section, enter the new password in the
Password
field.
5. Verify the new password by entering it in the
PW again
field.
6.
Click the
Save Settings
to commit changes. To login with the new username, close the web session, then enter
the new password on the
Login
page.
NOTE:
Password fields will always be masked for security purposes.
Changing the Administrator Password
