AT-UHD-SW-5000ED
36
Device Operation
5.
Click the drop-down list, next to the output which will be used to fetch the EDID. In this example, since the
display is connected to the
HDMI OUT
port, a memory location next to the
Output 1
option is selected.
Here, the EDID will be stored in
MEM_1
.
6. The saved EDID will appear next to the memory location, as shown below.
7.
Click any of the Input drop-down list boxes. Note that the stored EDID appears as an available EDID preset for
each available input on the AT-UHD-SW-5000ED.
8. The EDID storing procedure is completed.
Saved EDID
NOTE:
Once an EDID is written to a memory location, it can be overwritten with a different EDID,
when desired. To overwrite an EDID with a different EDID, repeat steps 5 through 7, above.
