PD42-1070 Hardware Manual • Hardware Version V1.00 | Document Revision V1.10 • 2018-July-03
11 / 25
4 Connectors and LEDs
Figure 9: PD42-1070 connectors (pin 1 highlighted in red)
4.1 Motor Connector
Pin no. Pin name Description
1
A1
Motor phase A pin 1
2
A2
Motor phase A pin 2
3
B1
Motor phase B pin 1
4
B2
Motor phase B pin 2
Table 5: Motor connector pinning
NOTICE
Do not connect or disconnect motor during operation!
Motor cable and motor inductivity might lead to voltage spikes when the motor is
(dis)connected while energized. These voltage spikes might exceed voltage limits
of the driver MOSFETs and might permanently damage them. Therefore, always
switch off or disconnect power supply before (dis)connecting the motor.
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at
www.trinamic.com
