PA N D O R A T R A C E R
U S E R A N D I N S TA L L AT I O N MA N UA L
6
7
Owner’s personal card
w
arNiNg
! e
rase
the
protective
layer
carefully
. d
o
Not
use
aNy
sharp
objects
to
avoid
damagiNg
of
a
hiddeN
iNformatioN
uNder
the
protective
layer
. t
he
iNformatioN
oN
the
owNer
’
s
persoNal
card
could
Not
be
chaNged
or
restored
iN
case
of
damage
or
lose
.
• LOGIN
is a 10-digit number. This
information is used to add tracker
to the online service and mobile
application.
• PASS
contains 8 characters and can
consist of digits, lower and upper
case letters. This information is used
to add tracker to the online service
and mobile application.
• Phone number
is a phone number
of the preinstalled SIM-card.
• PIN
not used.
w
arNiNg
! i
t
is
forbiddeN
to
damage
the
protective
layer
of
the
«o
wNer
’
s
persoNal
card
» -
the
iNformatioN
uNder
the
protective
layer
of
the
card
is
iNteNded
oNly
for
the
owNer
of
the
system
. w
heN
the
owNer
complaiNs
about
the
erased
protective
layer
,
the
system
is
reiNstalled
at
the
expeNse
of
the
iNstaller
.
MODES AND FUNCTIONS
Transportation mode.
This mode is active since the moment
of manufacture of the device. The tracker will exit this mode after
configuring the owner’s phone number or the additional phone
number or connecting of the main power supply. If all phone
numbers are deleted from the memory and the main power
supply is disconnected from the tracker, the device will activate the
transportation mode again.
Constant connection mode.
The main mode, designed to operate
with the main power supply (+12V/+24V) and ignition input connected.
In this mode the tracker is in a constant connection with online services
and peripheral Bluetooth devices.
·
Tracking
is an automatic function of the “Constant connection”
mode. It allows to determine coordinates and track the routes in the
online services. This function is enabled by ignition status appearance
and is disabled with ignition status disappearance.
·
Shock sensor alarm.
This function of the “Constant connection”
mode detects movement of the tracker and sends the alarm
notification, if the authorization devices are not in the coverage zone of
Bluetooth connection of the tracker. This function is enabled remotely
by a user using the online services.
·
Dismantling.
This automatic function of the “Constant connection”
mode allows to detect the overturn of the tracker and sends the alarm
notification to the owner.
·
Power off alarm
is an automatic function of the “Constant
connection” mode. It allows to control the disconnection of the main
+7-9хх-ххх-хх-хх
1070000000 / Y34aC4vJ
LOGIN / PASS
PIN
phone number
