USER MANUAL
after entering this level of programming (the engine should be warmed-up, idle
speed should match the stable idle speed of the warmed-up engine). The system will
confirm the presence of the idle speed status with green flashes of
LED
indicator.
Wait until the stable idle speed will be reached and save the changes.
Saving changes:
Press
VALET
button once to save idle speed. Successful recording of the idle speed
will be confirmed with the series of red and green flashes of
LED
indicator. The
system will exit programming menu and reboot after saving the idle speed.
Level 4 – Resetting to factory settings.
The procedure recovers the factory settings of the system without deleting previously
registered devices (tags, mobile device, relays, etc.) that is stored in the non-volatile
memory.
To reset the settings enter the programming mode and press
VALET
button four
times. Press and hold
VALET
button for more than 4 seconds until siren sound, then
release the button. The system will confirm the resetting to the factory settings with a long
red flash of
LED
indicator. After that the system will return to a programming mode.
Level 5 – Recording Bluetooth engine compartment module
To record a Bluetooth engine compartment module, enter programming mode and
press
VALET
button 5 times. The
LED
indicator will light green and the system will
enter the recording of an engine compartment module mode. Connect the module
in accordance with installation manual. The system will confirm the registration with a
short sound signal.
Saving changes:
To finish the recording of the engine compartment module,
VALET
button should
be pressed once again, the series of red and green flashes of the status
LED
will confirm
the saving, switch on the ignition to save the settings and exit programming mode.
Level 6, 7 – Recording Bluetooth radio relays No 1, No 2
Radio relays recording is performed one by one starting from the 6 level: radio relay
P R O G R A M M I N G T H E S Y S T E M
