PANDORA LIGHT PRO SERVICE-SECURITY SYSTEM
PROGRAMMING USING VALET bUTTON
The system allows programming some settings using
VALET
button. To configure all
settings use a computer to program the system.
Enter programming mode by entering the «Service PIN-code», Use
VALET
button
to enter the desired level number (press the button a number of times, equals to the
level number; pauses between presses should not exceed 1 second). The system will
confirm correct input with red
LED
flashes and short sound signals of a siren and
proceed to the desired level. If the input was incorrect, the system will not confirm
input and will await a new level input after a series of green and red flashes
P R O G R A M M I N G T H E S Y S T E M
Level 1
Recording remotes and radio tags into the system’s memory
Level 2
Changing the factory preset of the «Service PIN-code»
Level 3
Recording the idle speed to the system memory
Level 4
Resetting to factory settings
Level 5
Recording bluetooth engine compartment module
Level 6, 7
Recording bluetooth radio relays №1, №2
Level 8
Recording bluetooth GPS/GLONASS receiver
Level 9
Reserved
Level 10
Configuring system settings via the wireless interface
Level 11
Programming and configuring «Immobilizer code»
Level 12
Calibrating of fuel level
Level 13, 14
Reserved
Level 15
Emergency disabling of immobilizer radio tag
