Pandora DXL_5000L User Manual Download Page 55

Page: 55 / 64

USER MANUAL

external or located on the base unit VALET button. The digits input is indicated by an

external or located on the base unit LED indicator.

Entering the PIN-code:

•ENTER THE FIRST DIGIT

• Press the

VALET button a number of times, equals

to the first digit. Pauses between presses

should not exceed 1 second. Each pressing

will be confirmed with an orange LED

indicator flash. A pause for more than

1 second and a red LED indicator flash

confirm the input of the first digit. Then you

can enter the next digit.

•ENTER THE SECOND DIGIT•

Press the

VALET button a number of times, equals

to the second digit. Pauses between

presses should not exceed 1 second. Each

pressing will be confirmed with an orange

LED indicator flash. A pause for more than

1 second and a red LED indicator flash

confirm the input of the second digit. Then

you can enter the next digit.

• ENTER THE THIRD DIGIT •

Press the VALET button a number of times, equals to

the third digit. Pauses between presses should not exceed 1 second. Each pressing

will be confirmed with an orange LED indicator flash. A pause for more than 1 second

and a red LED indicator flash confirm the input of the third digit. Then you can enter

the next digit.

2-2-2-2

LED INDICATOR

VALET BUTTON

Summary of Contents for DXL_5000L

































































Search results

Summary of Contents for DXL_5000L

Reviews:

Related manuals for DXL_5000L

Brands by name

Popular brands

Pandora DXL_5000L, User Manual

Search results

Summary of Contents for DXL_5000L

Reviews:

Related manuals for DXL_5000L

Brands by name

Popular brands