32
TELEMETRY SECURITY-SERVICE SYSTEM PANDORA PROFESSIONAL
will block the engine. Engine blocking will occur immediately or at the time the car
starts moving, it depends on block implementation and system settings.
Arming/Disarming in the SLAVE mode
This mode is disabled by default. To use this mode, it is required to make additional settings
or additional connections. It is possible to monitor the status of an original security system
of a car by CAN-bus or by analog inputs in the “Slave” mode. When arming and disarming
original security system, Pandora will be armed and disarmed respectively.
There is an option named ‘Prohibit disarming when the tag is absent’ in the system
settings. When this option is enabled, disarming procedure will be performed only if
there is a tag in the radio zone.
Multi-button code immobilizer
Multi button code immobilizer (pin-to-drive) is a function that allows disarming,
disabling blocking and controlling timer channels using original vehicle controls
(button, lever or pedal).
To enter the immobilizer code, switch on the ignition and press a programmed
button a number of times equals to the first digit. Pauses between presses should
not exceed 1 second. More than 1 second pause will be interpreted as the start of the
next digit input. The immobilizer code can consist max of 4 digits from 1 to 9. After
entering a correct immobilizer code, depending on the settings, either the engine
blocking will be disabled or a programmed time channel will be activated or the
system will be disarmed. It is required to make additional connections and settings to
use this function.
Back-up power supply
A built-in battery allows extending operating time of the system in the armed mode to
promptly notify an owner in the cases of an unauthorized disconnection of the onboard
power supply. Power supply from the back-up battery can be also occur in case of a short-
time voltage drop at the time of starting the engine. If the back-up battery is discharged,
the system automatically starts charging it when the main power supply is active.
