Pandora DXL_5000L User Manual Download Page 11

Page: 11 / 64

USER MANUAL

Updating firmware of the remote control

• Download the Pandora Alarm Studio application to a personal computer and run the

program (the latest version of the application can be downloaded from pandorainfo.

com)

• Download firmware for the remote control. It can be downloaded by the Pandora

Alarm Studio

• Press and hold the button

of the remote control. Release the button right after

connecting the remote control with a PC via a USB cable. The application will offer to

update the firmware.

• Upload the firmware to the remote control using the Pandora Alarm Studio

application -

«LOAD FROM FILE»

Icons of the remote control

Red ALARM indicator

Flashes occasionally and sounds a short signal one time per minute after the end of any

alarm notification. It indicates until any button you press any button.

Green LOCK indicator

Flashes occasionally if there is a connection and the system is armed

Red UNLOCK indicator

Flashes occasionally when the system is armed

Red SEND indicator

Flashes occasionally when there is no connection

Summary of Contents for DXL_5000L

































































Search results

Summary of Contents for DXL_5000L

Reviews:

Related manuals for DXL_5000L

Brands by name

Popular brands

Pandora DXL_5000L, User Manual

Search results

Summary of Contents for DXL_5000L

Reviews:

Related manuals for DXL_5000L

Brands by name

Popular brands