35
34
User manual
Pandora DXL-1820L/1830L service-security system
For Pandora DXL-1820L/1830L optionally blocking BTR-101 radio relay is available. Blocking radio
relay with built-in accelerometer should be placed in the engine compartment. Herewith zone of
built-in aerial 2,4 GHz should not be shielded.
Provide a rigid fastening to the car body or to the fixed wirings. It is forbidden to hide the module
in wiring.
Radio relay power connects either from ignition or from a constant power wire. Radio relay is
normally closed, blocking is carried out only on unauthorized movement.
WARNING!
DO NOT PLACE RADIO RELAYS DIRECTLY ON ENGINE!
Blocking radio relay
ADDITIONAL INFORMATION
Glossary of terms
AlarmStudio
– an installation helper software that is to be installed on a Windows PC (preferably,
laptop). AlarmStudio allows changing any parameters in the system and provides installation tips for
particular cars. Easy to use and intuitive, AlarmStudio is required for in-depth and highly customized
installation. Installation without AlarmStudio, although entirely possible, may be incomplete and
lacking in functionality.
Base Unit
– it is a small box that acts as a ‘brain’ of the system. It contains a printed circuit
board, sensors and supplementary devices like 3D accelerometer and sockets for connecting it to
car systems. Powerful processor unit and ingenious algorithms allow for hundreds of programmable
parameters, accessible via AlarmStudio (and via VALET button for some).
Car alarm system
– a set of third-party electronic devices that are installed in a car body and
connected to its electric and data networks in order to provide enhanced security.
Car service-security system
– same as car alarm system but with more service options, e.g.
telemetry, remote engine start, various control options.
Channel
– a name we use in our service-security systems to indicated a combined position and
function of particular output socket and corresponding wiring.
Original security system
– a built-in security system that is present on some car models. You can
set up particular logic of interaction between this system and ours – control over it or a slave mode.
Telemetry
– in car service-security systems is a combined capability to gather, process and
convey to user various data regarding the car – temperatures, voltages, fuel level, sensor data, etc.
Timer channel
– a term we use in our service-security systems to name channels that activate
additional options or accessories (e.g. seat heating, light path, additional block relays). Any channel
(output) can be set as timer channel, that can be activated from the remote, or incorporated into
scheduled and sequential routines. To assign timer channels, use AlarmStudio.
2
5
1
4
3
NO
NC
COM
Programming
6
Aerial 2,4 GHz
+12V
