11
10
User manual
Pandora DXL-1820L/1830L service-security system
CONTROL OVER SYSTEM VIA PHONE
Call the system’s phone number. When it answers, enter command code.
WARNING!
IF THE CALL IS NOT MADE FROM THE OWNER’S NUMBER, GUEST PIN-CODE
SHOULD BE ENTERED. FACTORY SET GUEST PIN CODE IS 1-2-3-4. AFTER THE
SYSTEM IS INSTALLED, PLEASE CHANGE FACTORY SET PIN-CODE.
Control via speed dial DTMF commands
For example:
To have simple access to engine start function, create a new contact in the contact
list of your phone, name it ‘Engine start’, for instance, and add the number in the following format:
+XXXXXXXXXXX,123*,297*
, where:
‘+XXXXXXXXXXX’
– the system’s phone number,
‘,’
– pause is a feature of the phone (can be displayed as the ‘P’, see the instructions of the phone),
‘123*’
– remote engine start DTMF command,
Individual PIN-code is written on the owner’s plastic card under
protective layer. Erase the protective layer and use VALET button
to input PIN-code.
1. Using VALET button, input the first digit of the code (press
the button a number of times, equal to the first digit; pauses
between presses should not exceed 1 second). The system will
confirm with red LED indicator flash.
2. Similarly input the second, third and fourth digit. Every input will be confirmed with red LED
flash.
3. The system will confirm correct PIN-code with red and green flashes of LED indicator. If the input
was incorrect, it will be indicated with long red flash. New input can be attempted after 5 seconds.
If immobilizer/Antihijack mode is activated:
4. Using VALET button, input PIN-code. Factory preset PIN-code is
1-1-1-1
(4 presses with pauses
for 2 seconds).
5. The system will confirm correct PIN-code with red and green flashes of LED indicator and will
enter programming mode. New input can be attempted after 5 seconds.
6. To switch off immobilizer/Antihijack function, press VALET service button 15 times (pauses
between presses should not exceed 1 second). The LED will be lit green.
7. Input individual PIN-code similar to emergency disarm. The system will confirm correct PIN-
code with 2 short signals of the siren and with red flash of LED.
8. To activate immobilizer/Antihijack function, enter level 15, the system will confirm it with red
flash of LED. Press VALET button once, the system will confirm it with green flash of LED and with 1
short signal of the siren.
For emergency arming when the engine is stopped, press and hold VALET button for 3 seconds.
The system will be armed in 30 seconds.
While there is a countdown, the LED will be lit red.
#
#
1
1
*
*
0
0
9
9
*
*
*
*
9
9
0
0
*
*
1
1
0
0
0
0
*
*
1
1
2
2
3
3
*
*
Return to previous menu/state
Repeat the last message
Silent arming
Help
0
0
0
0
*
*
Silent disarming
1
1
*
*
Arming
0
0
*
*
Disarming
Event history
Request GSM account balance
Start the engine/prolong heating
3
3
2
2
1
1
*
*
Stop the engine
3
3
3
3
3
3
*
*
Switch on add. function using F via CAN
5
5
0
0
0
0
*
*
4
4
5
5
6
6
*
*
6
6
5
5
4
4
*
*
6
6
6
6
6
6
*
*
9
9
9
9
9
9
*
*
2
2
5
5
8
8
*
*
System information
Request current coordinates
Switch on additional channel
Switch off additional channel
Enable engine blocking
Disable engine blocking
9
9
9
9
8
8
*
*
Disable immobilizer tag
8
8
8
8
8
8
*
*
Enable immobilizer tag
2
2
2
2
2
2
*
*
Disable Hands Free mode
2
2
2
2
3
3
*
*
Enable Hands Free arming
2
2
2
2
4
4
*
*
Enable Hands Free disarming
2
2
2
2
5
5
*
*
Enable Hands Free disarming only with autom. start
7
7
8
8
9
9
*
*
Enable automatic engine start
9
9
8
8
7
7
*
*
Disable automatic engine start
2
2
9
9
7
7
*
*
Call ended
5
5
5
5
1
1
*
*
Enable valet mode (see description below)
1
1
5
5
6
6
*
*
6
6
5
5
1
1
*
*
Switch on preheater
Switch off preheater
5
5
5
5
2
2
*
*
Disable valet mode
1
*
*
Tow truck mode
5
WARNING!
MAKE SURE THAT PROTECTIVE LAYER ON THE OWNER’S PLASTIC CARD IS INTACT
AFTER THE INSTALLATION OF THE SYSTEM. PLASTIC CARD HOLDS INDIVIDUAL
PIN-CODE.
