7
6
User manual
Pandora DXL-1820L/1830L service-security system
Siren sounds and turn light signals
Signal name
Signal description
Alarm mode, PANIC mode
Incessant sound and light signals for 30 seconds
Arming
1 sound and 1 light signals
Disarming
2 sound and 2 light signals
‘Sensors triggered’ signal when disarming
4 sound and 4 light signals
‘Sensor malfunction’ signal when arming
4 sound and 4 light signals
Sensor warning level triggered
3 sound signals
Car search
5 sound and 5 light signals
Meaning of indicator LED colors
Indicator status
Meaning
Short red flashes
The system is armed
Lit red
The system is preparing for automatic arming
Orange flash
Confirms VALET button press
Green flashes
Confirms a number of recorded remotes (when switching on ignition)
Red and green flashes
PIN-code confirmed
Faded
The system is disarmed
CONTROL OVER SYSTEM
Arming/disarming using radio tag button
To arm/disarm the system, RF tag should be in radio coverage area.
The system produces a protected (AES-128 encryption) interactive
high-speed exchange of authorization codes in the frequency range
2,4 GHz on one of 125 channels. To arm the system when the ignition
is switched off, shortly press the tag button. The system will confirm
the command receiving with 1 short sound signal and 1 flash of
turn indicators. To disarm the system, shortly press the tag button.
The system will confirm the command receiving with 2 short sound signals and 2 flashes of turn
indicators. Each button press will be confirmed with LED indicator flash of the tag that indicates the
battery is functioning correctly. If LED indicator does not flash or light, the tag battery should be
replaced (see ‘Replacing immobilizer tag battery’ section).
Arming/disarming in Hands Free mode
The system allows for programmable
Hands Free
arming and disarming. To arm the system,
when the engine is not running, move with the remote tag away from the car at a distance greater
than the regular radio coverage (10 meters for 2,4 GHz) – the system will be armed automatically. To
disarm the system, move toward the car with remote tag. Enabling/disabling this function can be
performed with a phone (see ‘Control over system via phone’ section).
Arming/disarming in slave mode
In this mode it is possible to monitor the status of original security system of the car via CAN-bus
or by analog inputs. When arming and disarming original security system, Pandora will be armed and
disarmed respectively. The presence of a tag in the radio zone is not required, but at the beginning of
motion if the tag is not detected by the system, the engine will be blocked.
There is an option in the system settings named ‘Disable disarming when the tag is not present’.
When this option is enabled, disarming procedure will be performed only if there is a tag in the radio
zone.
