35
34
USER MANUAL
PANDORA DXL 1100L SERVICE-SECURITY
R E M O T E C O N T R O L
sounds disabled
sounds enabled
sounds
siren
settings
siren
settings
siren
settings
sounds disabled
sounds enabled
sounds
siren
settings
siren
settings
siren
settings
sound signals are enabled
sound signals are disabled
REMOTE CONTROL SOUND NOTIFICATIONS SETTINGS
This function disables all sound signals of the remote, this mode does not apply to
alarm clock and main zones triggering. LED indication and vibration remain enabled.
To set one of two notification options, select Sounds menu. Short presses of
and
buttons will cause switching between menu settings. This mode does not
require to save.
To exit menu, press and hold button for 1 second.
RADIO CHANNEL CONTROL SETTINGS
There are 3 options to notify when the owner is not in radio coverage zone. Select
«Connection lost»
menu, short presses of
button will cause switching between
menu settings. This mode does not require to save.
To exit menu, press and hold button for 1 second.
«Connection lost» ringtone
notification
alarm signal
all notification are disabled
connect. lost:
ringtone
connect. lost:
alarm
connect. lost:
no sound
connect. lost:
ringtone
connect. lost:
alarm
connect. lost:
no sound
connect. lost:
ringtone
connect. lost:
alarm
connect. lost:
no sound
MAINTENANCE/VALET MODE
It is recommended to put system into maintenance mode before handing your
vehicle to the service. When this mode is switched on, security system stops
interfering with built-in electronics and disables all functions to ease maintenance.
Moreover, you will not have to leave the remote control in the car. Disabling
maintenance mode is not possible without using the main remote control. This
feature is implemented to prevent recording additional remotes during maintenance
without the owner knowing. To activate maintenance mode when ignition is switched
on, select
«Valet mode»
and shortly press
button. The system will confirm
enabled maintenance mode with green flash of
LED
indicator of the
VALET
button
when ignition is switched on. To exit this mode, select Valet mode and shortly press
button.
R E M O T E C O N T R O L
