19
18
USER MANUAL
PANDORA DXL 1100L SERVICE-SECURITY
R E M O T E C O N T R O L
REMOTE AND AUTOMATIC ENGINE START
The system allows for remote engine start using remote engine start command or
automatic engine start using preconfigured automatic engine start function. Remote
start can be used to heat engine, charge battery. Remote and automatic start can
only be used when the system is armed. When using remote and automatic engine
start functions, make sure that the motorcycle is securely fixed on a parking position
While system is in remote and automatic start mode, it keeps performing all security
functions of all of the security zones excluding shock sensor. To compensate, motion
sensor sensitivity and responsiveness will be increased. If any security zone will be
triggered, the engine will be immediately stopped and alarm mode will be entered.
Herewith all engine blocking functions will be activated.
REMOTE ENGINE START
If the system is prepared for remote start, to execute it, press and hold
button
for 3 second. Sound signal will confirm the command, LCD will show flashing engine
operation icon signifying preparation to the engine start. In a few seconds the
engine will be started, the remote control will play
«ENGINE START»
ringtone and
shown spinning engine operation icon .
Engine operation duration depends on system settings – either heating time or
threshold temperature for engine stop To remotely stop the engine while it performs
heating, press and hold
button for 2 or more seconds. The engine will be
immediately stopped and it will be confirmed by remote control playing
«ENGINE
STOP»
rington and engine operation icon fading .
The remote control will give notification 1 minute before designated engine
stop: icon will flash and
«ENGINE STOP IN 1 MINUTE»
ringtone will play every
10 seconds. If remote engine start command is sending during remote engine start
procedure the operation period will be extended by 10 minutes. This procedure can
be repeated multiple times.
R E M O T E C O N T R O L
3 flashes
ringtone
«Engine start»
press and
hold for 3 sec.
preparing
to start
engine start
~~
ringtone
«Engine stop»
press and
hold for 2 sec
engine stop
~~
ringtone
«Engine start»
~~