Pando PI-DOM, Installation Manual

Page: 88 / 101

12
INOXPAN S.L.
EN
Recall Function
After switching off the hob [ ], it is possible to recall the last settings.
•
cooking stages of all cooking zones (Booster)
•
minutes and seconds of programmed cooking zone-related timers
• Keep warm function
•
Automatic cooking
The recall procedure is the following:
• Press the key [ ]
• Then press [ II ] before the light stops blinking.
The previous settings are activated again.
“Keep warm” Function
This function allows the cooking zones to reach and automatically maintain a temperature of 42,
70 or 94°C, this to avoid liquids flowing over and pans burning.
•
To start the function « Keep warm » :
Action C ontrol panel Display
42°C
to engage Press once on area under [ ] [ U ] and [ ]
70°C
to engage Press twice on area under [ ] [ U ] and [ ]
94°C to engage Press 3 times on area under [ ] [ U ] and [ ]
To stop Slide on the “SLIDER“ [ 0 ] to [ 9 ]
or press area under [ ] until [ 0 ] [ 0 ]
The maximum duration of keeping warm is 2 hours.
Bridge Function
This function allows the use of 2 cooking zones at the same time with the same features as a
single cooking zone. Power function is not allowed.
Action C ontrol panel Display
Activate the hob Press display [ ] [ 0 ]
Activate the bridge Press simultaneously on [ ] [ 0 ] and [ ]
of the 2 cooking zones
or
put a great pan on the 2 zones [ ] blink
and press on the 2 “SLIDER” [ ]
Increase bridge Slide on the “SLIDER“
which indicates the power [ 1 ] to [ 9 ]
Stop the bridge Press simultaneously on [ ]
of the 2 cooking zones [ 0 ]
Control panel locking
To avoid modification of the setting of the cooking zones , particularly when cleaning, the control
panel can be locked (with exception to the On/Off key [
]).
Action C ontrol panel Display
Lock the hob Press [ ] during 6s lock light on
Unlock the hob Press [ ] during 6s lock light off