Pando PI-DOM, Installation Manual

Page: 85 / 101

9
INOXPAN S.L.
EN
Direct “SLIDER
Power selection zone “SLIDER”
and timer setting zone
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a control
light, a letter or a number in the display and/or a “beep” sound.
In case of normal use, press only one key at a time.
Power selection zone “SLIDER” and timer setting zone
To select the power with the slider, slide your finger on the “SLIDER” zone. You can already have
direct access if you put your finger directly on the chosen level.
Starting-up
•
S tart up / switch off the hob:
A ction C ontrol panel Display
To start press key [ ] [ 0 ]
To stop press key [ ] nothing or [ H ]
•
S tart up / switch off a heating zone:
A ction C ontrol panel Display
To set slide on the “SLIDER“ [ 1 ] to [ P ]
(adjust the power) to the right or to the left
To stop slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
If no action is taken within 20 seconds ,the electronics return in waiting position.
Pan detection
This cooktop is fitted with an interactive control system that makes it very easy and comfortable to
use. After switching on the cooktop, when you put a cookware on the glass, the control system
automatically detects it. This system also automatically indicates you which slider control to use by
displaying a [ 0 ] over it. You then just have to set the expected cooking level.
Pan detection ensures a perfect safety. Induction does not work:
•
If there is no pan on the heating zone, or if this pan is not adapted to induction. In this case it
is impossible to increase the power and the display shows [ U ]. This symbol disappears when
an induction pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped.
• The display shows [ U ]. The symbol [ U ] disappears when the pan is put back to the
heating zone. The cooking continues with the power level set before.
After use, switch the heat element off: do not let the pan detection [ U ] active.