Pando PHB-861, Operating Manual

Page: 237 / 279

INOXPAN S.L. Pando EN
28
Change during cooking
During the operation period of the appliance, you can change the cooking
type and temperature by using the oven function or the slider control. After the change, if
there is no further action after 6 seconds, the oven will heat up according to what you have
changed.
If you want to change the cooking time during the cooking process, touch and change it using
the slider or the [ +/- ] symbol . After the change, if there is no further action after 6
seconds, the oven will operate at what you have changed it to.
If you want to cancel the cooking process cooking process, touch.
NOTE
:
Changing the mode/temperature/resting time may negatively influence the cooking
result, so we strongly advise you not to do so unless you are very experienced in cooking.
CAUTION!
During operation the oven becomes very hot, especially inside the oven cavity. Once the oven
has been switched off, NEVER touch the interior surfaces of the oven or the heating elements.
Use oven gloves when removing accessories or utensils from the cavity and allow the oven
to cool down. Keep children at a safe distance to avoid burns.
Timer
You can use the timer function by touching . When the time comes , the oven will beep
to remind you. At the first touch of , set the timer by hours, then touch again and set the
timer by minutes. again and set the timer by minutes. Touch again and the adjustment
is complete.
You can set the timer before and during the cooking process.
Steam
1. With the oven in standby mode, press the steam button to add steam after setting the
mode.
2. Steam can be added manually by pressing the steam button during cooking.
3. With the oven in standby mode, press the steam button to set the steam mode and add
steam for cooking. The default steam level is 1.
NOTE : The steam has three levels, the amount of steam increases as the level increases. Press
the steam button once and you will have level 1. Press twice and you will have level 2, and
press three times and you will have level 3. Whichever level you choose, the light on the right
of the display will show the level
(L01/L02/L03).
Press the steam button four times to cancel adding steam and it will turn off.
PHTV-862