Pando INOXPAN S.L, User And Installation Manual

Page: 61 / 104

INOXPAN S.L. EN - 61
2. RECOMMENDATIONS TO BEAR IN MIND BEFORE INSTALLATION.
SUCTION VERSION (Fig.1): Expels fumes outdoors, it is the most recommendable, as it offers the best
results regarding suction and noise levels.
FILTER VERSION (Fig.2) (Optional): Exhausts fumes and smells normally recycled to the inside of the
premises (A). This option can be used if it is not possible to exhaust outdoors.
This option offers less suction and produces more noise than the previous.
This filtering option needs a kit of components which includes among, other things, active carbon filters, this
kit depending on the version, will be factory fitted, installed by a professional installer or by
Pando’s authorised
technical service. Please consult with the manufacturer or the dealer to see if your model is compatible with
this option.
Pay special attention to all the instructions given
below, as optimum operation of you hood will
depend on this.
•
CONDUIT FOR EVACUATING FUMES AND SMELLS :
A. With a diameter as recommended in the installation manual and the technical datasheet of the version of
the motor (see section 6 of the manual) .
B. Try to make it as short as possible and avoid or limit the number of bends, if they are unavoidable, try to
make them as open as possible, never make bends of less than 90º .
C.
Avoid changes in shape and section of the conduit outside the manufacturer’s recommendations, as this
will drastically affect the optimum operation of the h o o d .
(a) If it is necessary to use a conduit smaller than the recommended section, the motor will offer less
suction and noise levels will increase. A tip for minimising losses is not to place the narrowing at the outlet
of the motor, but at least 0.5-1 m away, leaving this first part at least with an adequate section
.
Fig.1 Fig.2