Pando E-392, Installation Manual

Page: 131 / 136

The control panel displays [ Er47 ] :
•
The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the Customer Service.
ENVIRONMENT PRESERVATION
A slight "click click" sound is heard when placing a container on a stove:
This sound is normal. It is a safety indicator to detect the presence of the container on the
inductor. It is automatically activated when the hob is turned on and during cooking.
•
INSTALLATION INSTRUCTIONS
The installation must be performed by a qualified electrical contractor.
How to stick the gasket:
The gasket supplied with the hob prevents the intrusion of liquids into the cabinet below.
It’s installation has to be done carefully, in conformity with the following drawing.
131
EN
The symbol on the product or its packaging indicates that this product cannot be
disposed of like normal domestic waste. The product must be handed over at a
collection point for recycling electrical and electronic equipment. If you ensure that
this product is correctly disposed of, you will help to avoid the possible negative
environmental and public health effects that could arise from incorrect disposal.
For more detailed information about recycling this product, please contact your city
authorities, the domestic waste service or the establishment where you purchased
it. This electrical appliance is marked in compliance with European Directive
2012/19/EU on electrical and electronic appliance waste (WEEE
).
ENVIRONMENTAL PROTECTION AND WASTE TREATMENT
DISPOSAL OF THE PACKAGING. The packaging is marked with in Green Dot.
In its commitment to the protection of the environment and in compliance with the provisions of the European
Directive 94/62 / EC on packaging and packaging waste and the derived Law 22/2011 on Contaminated
Residues and Soils, Pando entrusts entities of social economy an Integrated Management System, responsible
for the periodic collection at the consumer's home or in its vicinity of used packaging and packaging waste for
subsequent treatment.
To remove all packaging materials such as cardboard, expanded polyurethane, and film, use the appropriate
containers.
This ensures the correct treatment and reuse of packaging materials.
Stick the gasket (2) two millimetres from the
external edge of the glass, after removing the
protection tape (3).