26
To set the
Date & Time
:
1.
With the “Scan Ready”
screen displayed, press
to enter
Menu
mode.
2.
Press
to select
Settings
.
3.
Press
to scroll to
Date & Time
, and then press
to select it.
4.
Press
to navigate to each setting option.
5.
Press
to set the value.
6.
Press
to accept values and to complete.
7.
Press
to exit.
Calibration
(as needed only)
If the scanned image has vertical lines or discolorations, the scanner may need calibrating in
order for the Contact Image Sensor (CIS) to resume its color and sharpness precision.
Do not calibrate the scanner unless it is necessary to correct scanned image problems.
Calibration will also format the internal storage disk (ONLY when a microSD card is not inserted).
For calibration instructions, see the
“Calibrate the Scanner”
section on page 41.
Factory Default
At any time you can reset all menu settings back to the factory defaults.To reset defaults:
1.
With the “Scan Ready”
screen displayed, press
to enter
Menu
mode.
2.
Press
to select
Settings
.
3.
Press
to scroll to
Factory Default
, and then press
to select it.
4.
Press
to select
Yes
.
5.
To confirm, press
.
6.
After a successful reset, the scanner automatically shuts off. Press
to turn the
scanner back on.
About
The
About
option lists the system version, calibration status, and device serial number.
You may need this information if you contact our Customer Support.
1.
With the “Scan Ready”
screen displayed, press
to enter
Menu
mode.
2.
Press
to select
Settings
.
3.
Press
to scroll to
About
, and then press
to select it.
