User Manual For Cyclone LC Programmers
29
RESET
9
10
TMS
VDDE7
11
12
GND
RDY
13
14
JCOMP
DSC Pinout
TDI
1
2
GND
TDO
3
4
GND
TCK
5
6
GND
NC
7
8
NC/KEY
RESET
9
10
TMS
VDD
11
12
GND
NC*
13
14
TRST
*The pin is reserved for internal use within the PEmicro interface.
3.18.3.1 BERG14-to-MICTOR38 Optional Connector
PEmicro offers a 14-pin BERG to 38-pin MICTOR adapter, sold separately, that may be used on
Port C of the
Cyclone LC
. The PEmicro part number is BERG14-TO-MICTOR38.
Figure 3-18: BERG14-TO-MICTOR38 Adapter (Sold Separately)
3.18.4
PORT D: 26-Pin Debug Connector (ColdFire V2/3/4)
The Cyclone provides a standard 26-pin 0.100-inch pitch dual row 0.025-inch square header for
ColdFire MCF52xx/53xx/54xx family of microprocessors. This port connects to the target hardware
using either the ColdFire extension cable for synchronous ColdFire targets such as MCF5272 &
MCF5206E (PEmicro part# CABLE-CF-ADAPTER, sold separately), or a standard 26-pin ribbon
cable for asynchronous ColdFire targets (included). Please refer to each processor’s user manual
to identify whether it is a synchronous or asynchronous interface. The location of the this header is
indicated as PORT D in
ColdFire V2/3/4 Pinout
N/C
1
2
BKPT
GND
3
4
DSCLK
GND
5
6
NC*
RESET
7
8
DSI
VCC
9
10
DSO
GND
11
12
PST3
PST2
13
14
PST1
PST0
15
16
DDATA3
DDATA2
17
18
DDATA1
