24
• When replacing the neck strap, turn off the power of the microphone, and make sure that
the microphone is not connected to the charger.
Remove the neck strap from the microphone.
1
Hold two portions of one side of strap with
your fingers firmly, and push the portions
toward the center of the clip.
2
While pinching the clip to open, pull the
strap out of the claw.
Remove the other side of the neck strap in the
same way.
When attaching a neck strap to the
microphone, hook each side of the
strap to each claw, and reverse the
above procedure.
After the neck strap is attached to the micro-
phone, make sure both sides of neck strap are
hooked to the claws.
Important:
• Use only the neck strap that is intended for this microphone.
(This neck strap is provided with a safety closure to prevent strangling.)
Otherwise, that may result in accidental injury.
Replacing the neck strap
Hold and push.
Clip
Neck strap
Pull out.
Claw
Pinch.
Neck strap
Claw
Clip
