22
Charging a rechargeable battery
1
Turn off all microphones.
2
Connect the power cable to the input terminal of the battery charger (WX-LZ150).
3
Connect the power plug of the power cable to the AC outlet.
4
Connect the DC plug of the charger to the DC input terminal of the microphone.
When inserting the DC plug into the DC input terminal, align the triangle mark (
D
) of the
DC plug with that (
D
) of the microphone.
To charge two microphones at the same time, connect one DC plug each to the DC input
terminals. To charge one microphone at a time, leave the free DC plug lying nearby.
After connecting the microphone to the charger, the charge indicator (red) indicates the
charging status as follows:
ON:
Charging.
OFF:
Charging completed, or no battery installed.
Blinking:
Indicates one of the following conditions.
• A dry cell or deteriorated rechargeable battery is installed. Install a rechargeable bat-
tery instead of a dry cell, or a new rechargeable battery.
• The temperature of the battery may be out of the acceptable range. Confirm that the
temperature is within the acceptable range.
5
When charging is completed, disconnect the power plug from the AC outlet.
WX-LT350
CHG
PWR
F
BATT
SE
LE
CT
O
WN
OTHER L
INE
M UTE
To AC outlet
2
Charge indicator
[PWR/MUTE]
button
DC plug
Power cable
(Plug type differs depending
on the locality.)
Power plug
DC input terminal
Battery Charger
WX-LZ150
4
1
3
5
Input terminal
