19
This function allows you to use an external microphone instead of the microphone opening of
this microphone. Connect an external microphone (for example, an electret condenser micro-
phone) to the microphone input terminal of the microphone, and transmit the audio to the
receiver.
1
Turn off the power of the microphone.
2
Using the ø3.5 mini-plug, connect the external microphone (for example, a commer-
cially available electret condenser microphone) to the microphone input terminal.
3
Turn on the power of the microphone.
Important:
• Do not connect external devices (CD players or MD players) to the microphone input termi-
nal. Loud noises may damage your hearing. When an external device is mistakenly con-
nected, turn off the power of the microphone and the external device, disconnect the plug,
and connect the device to external input terminal.
Note:
• Once the ø3.5 mini-plug is plugged into the microphone input terminal, priority is given to
this audio transmission from an external microphone and the audio from the microphone
opening will not be transmitted.
• The microphone input terminal of the microphone is a monaural terminal. If a stereo exter-
nal microphone is plugged into the microphone input terminal, either the right or the left
channel audio will be transmitted.
• When fine-tuning the volume of external microphone using this microphone, select [OWN]
by pressing the selector button. For fine tuning, refer to "Adjusting the volume" (
☞
page 16,
17).
• Use a unidirectional microphone. The use of an omnidirectional microphone may cause
feedback.
• In addition to this manual, refer to the operating instructions of the external microphone to
be connected.
Connecting an external microphone
WX-LT350
BATT
F
CHG
O
WN
OTHER L
INE
PWR
SE
LE
CT
M UTE
2
ø3.5 mini-plug
1, 3
[PWR/MUTE] button
Microphone input terminal
Electret condenser microphone
(commercially available)
