16
Adjusting the volume
The microphone can control the volume of audio signals that are output from the infrared
receiver (WX-LR100, WX-LR100/A, WX-LR100/B), the infrared receiver/amplifier (WX-LA20, WX-
LA50), and the infrared wireless powered speaker (WX-LP100), and the volume of audio sig-
nals input to the line input terminal of the infrared receiver/amplifier (WX-LA50) and the infrared
wireless powered speaker (WX-LP100) (as of June 2009).
After adjusting the volume level at the infrared receiver and any connected external devices,
the speaker can make fine adjustments, such as level differences, by performing the following
operations on the microphone.
1
Press the selector button
When the selector button is pressed for the first time after turning on the power, the [OWN]
selection indicator lights, and after that the selection indicator for the preceding selection
([OWN], [OTHER], [LINE]) will light. Then press the selector button repeatedly to select the
desired selection. The selection indicators light in the following order:
* The selection indicator lights for 5 seconds. If no operation takes place within this period,
the indicator turns off automatically.
2
Press the volume button [
D
/
C
]
While the selection indicator for the selection made in 1 is lit, either press the volume button
or keep it pressed.
Pressing the volume button [
D
] will increase the volume, pressing [
C
] will decrease it. The
adjustment range is +6 dB to –16 dB, and every pressing corresponds to a change of
2 dB.
The selection indicator goes off 5 seconds after the volume button was pressed for the last
time.
• When [OWN] is lit
Adjust the audio volume of this microphone (input from the microphone opening, exter-
nal input and microphone input).
* Adjustment is not possible while muted ([OWN] selection indicator is blinking).
WX-LT350
CHG
PWR
F
BATT
SE
LE
CT
O
WN
OTHER L
INE
M U TE
Selector button
1
Selection indicator
Volume button
2
OTHER
LINE
OWN
