13
Inserting a battery
• Carefully read the "Precautions" and proceed accordingly.
• To insert a battery, turn off the power of the microphone, and make sure that the micro-
phone is not connected to the charger.
• To replace a battery, refer to "Replacing a battery". (
☞
page 21).
Note:
• Do not touch the battery poles with hands. Otherwise poor contact or noise may result. If
dirty, wipe off with a dry soft cloth.
1
Confirm that the battery indicator is off.
2
Remove the battery cover.
Pull the battery cover in the arrow direction while pressing the
A
portion with both right and
left thumbs to remove the cover.
3
Install a battery.
When installing the battery, check the polarity.
If using a rechargeable battery, install one AA size nickel metal hydride battery, if using a
dry cell, install one AA/LR6 size alkaline dry cell, paying attention to the polarity marks (+,
–) of the battery slot.
4
Attach the battery cover.
Push up the battery cover to the direction of the arrow in the figure, and fit it to its original
position.
WX-LT350
CHG
F
BATT
SE
LE
CT
PWR
O
WN
O
THER
LIN
E
M UTE
Battery indicator
Rear view
3
4
Battery cover
2
1
A
