22
Setting the Center Module
w
w
Setting the single talk [TALK]
Set whether to use single talk.
1
On the Settings screen, touch the [Headsets]
button, and then the [TALK] button.
[Single Talk]
Set single talk to ON to use it.
When this is set to ON, you can restrict talking between
customer and store personnel to 1 unit from a maximum
of 4 units that can possibly communicate.
OFF:
Do not use the single talk function.
ON:
Use the single talk function.
Default setting: OFF
w
p
The number of units that can simultaneously talk per
lane is up to 4 when TALK and PAGE are combined.
This limitation on communication does not change
even if this setting is set to ON.
w
p
The single talk setting is shared by the Lane A and
Lane B when using WX-CC412BP.
w
p
The All-In-One Headset or Belt Pack that is set to
manager mode is not subject to this function. Even
when an All-In-One Headset or Belt Pack is in a TALK,
TALK is still possible from the manager’s unit.
w
p
Furthermore, even when the manager’s unit is in a
TALK, TALK is still possible from one of the All-In-One
Headsets and Belt Packs.
w
p
This function can be changed during operation, and
operation can continue uninterrupted even if the
setting is changed between ON and OFF. (It is not
possible to forcibly cut off TALK)
w
p
When the function is switched from OFF to ON while
multiple people are using TALK, communication
continues until talking is finished. However, during the
time when at least 1 All-In-One Headset or Belt Pack
is continuing to TALK, TALK is not possible on the
other units.
Note
w
w
Setting the Wireless Repeater
[Wireless Repeater]
This function is used to register or delete Wireless
Repeaters.
How to register an ID
Register Wireless Repeaters. You can extend the wireless
communication distance by using Wireless Repeaters.
w
p
To use a Wireless Repeater, its ID must be registered.
w
p
For ID registration, set the Center Module to Wireless
Repeater ID registration mode, and register the ID by
operating the repeater.
The ID registration procedure for the Wireless Repeater is
described below.
1
On the Settings screen, touch the [Wireless
Repeater] button, ([Lane A/B] button,)* and
then the [ID Registration] button.
* This appears only when the WX-CC412BP is used.
w
p
If 2 Wireless Repeaters have already been registered
in the Center Module, the [ID Registration] button
cannot be touched.
First delete the ID of a Wireless Repeater, then do the
ID registration procedure again.
Note
2
Touch the [Start] button.
w
p
The following confirmation pop-up screen is
displayed. You cannot perform other operations
during ID registration. To continue ID registration,
touch the [YES] button. To stop ID registration, touch
the [NO] button.
