19
English
Setting the Center Module
2
Touch the [Start] button.
w
p
The following confirmation pop-up screen is
displayed. You cannot perform other operations
during ID registration. To continue ID registration,
touch the [YES] button. To stop ID registration, touch
the [NO] button.
w
p
Touch the [YES] button to start ID registration mode.
The number of the All-In-One Headset or Belt Pack that has
been registered is displayed.
3
On WX-CH450 and WX-CT420, press the
[POWER] button while holding down the [T1]
button and [T2] button.
On WX-CH455, rotate the microphone boom
while holding down the [T] button and [P]
button to turn on the power.
w
p
The All-In-One Headset or Belt Pack starts up in ID
registration mode. The “Registration Mode” voice
prompt will be heard from the earphone, and the
power indicator will blink orange.
In ID registration mode, the buttons and indicators
have different functions from those at normal startup.
4
On WX-CH450 and WX-CT420, press the [T1]
button.
On WX-CH455, press the [T] button.
The All-In-One Headset or Belt Pack searches for a
Center Module that is in ID registration mode. The
“Connecting center module A” voice prompt will be
heard from the earphone, and the lane indicator will
blink orange.
In the case of the WX-CC412BP, after lane A
registration, the “Connecting center module B” voice
prompt will be heard, and the lane indicator will blink
green.
w
p
When ID registration has been completed
successfully, the “Registration complete” voice
prompt will be heard from the earphone, and then a
voice prompt for the number of the registered All-In-
One Headset or Belt Pack will be heard. The power
indicator and the lane indicator now stop blinking,
and light up.
After registrating all of the headset IDs, touch the [Stop]
button on the ID registration screen.
ID registration mode for the Center Module is exited. The
power indicator of the All-In-One Headset or Belt Pack
changes from orange to green.
w
p
When [Sound Band] is set to “Wideband” on the
Center Module, the “Out of range” message is
broadcast when the power is turned on and calling
is not possible with the Belt Pack (WX-CT420) and
All-In-One Headsets (WX-CH450, WX-CH455, and
WX-CH457P with software version earlier than 2.0).
(ID registration is possible.)
For details, refer to “Setting audio quality [Sound
Band]” (p.15).
Note
