Specifications
•
Basic
Power source *
1
:
AC 24 V, PoE+ device (IEEE802.3at compliant) or Tested PoE injector (60 W)
Power consumption *
1
:
AC 24 V: 3.5 A/Approx. 55 W
Tested Power over Ethernet (Injector: 60 W) DC 54 V: 1.0 A/Approx. 50 W
PoE+ DC 54 V: 470 mA/Approx. 25 W (Class4 device)
Operating environment
Ambient operating
temperature:
–50 °C to +55 °C {–58 °F to +131 °F} (AC 24 V/ Tested PoE injector (60 W))
–30 °C to +55 °C {–22 °F to +131 °F} (PoE+ device)
(Power On range: –30 °C to +55 °C {–22 °F to +131 °F}
(AC 24 V/ PoE+ device/ Tested PoE injector (60 W)))
Ambient operating humidity:
10 % to 90 % (no condensation)
Storage environment
Storage temperature:
–50 °C to +70 °C {–58 °F to +158 °F}
Storage humidity:
10 % to 95 % (no condensation)
Monitor output (for adjustment):
VBS: 1.0 V [p-p]/75 Ω, composite (BNC)
An NTSC or PAL monitor can be connected to the camera (the monitor type can be
changed by the software).
External I/O terminals:
ALARM IN 1 (DAY/NIGHT IN)/ ALARM IN 2 (ALARM OUT)/
ALARM IN 3 (AUX OUT) (x1 each)
DAY/NIGHT IN, ALARM OUT, and AUX OUT can be used by changing the settings
of Terminal 1, Terminal 2, and Terminal 3.
Microphone/line input:
ø3.5 mm monaural mini jack
Input impedance: Approx. 2 kΩ (unbalanced)
For microphone input:
Applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Recommended sensitivity of microphone: -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz)
For line input:
Input level: Approx. –10 dBV
Audio output:
ø3.5 mm stereo mini jack (monaural output):
Output impedance: Approx. 600 Ω (unbalanced)
Output level: -20 dBV
Water resistance *
2
:
SW598A
Main body: IP66 (IEC60529),Type 4X (UL50),NEMA 4X
SW397B
Main body: IP66 (IEC60529),Type 4 (UL50),NEMA 4
Shock resistance:
Compliant with IK10 (IEC62262)
Dimensions:
Maximum ø229 mm x 392 (H) mm {ø9-1/32 inches x 15-7/16 inches (H)},
Mass:
Approx. 5.0 k
g
{11.02 lbs}
Finish:
Main body:
Aluminum die cast
Natural silver
Sunshields*
3
:
ASA resin coating Natural silver
Dome cover section: Polycarbonate resin (Rain wash coating)
SW598A
Polycarbonate resin
SW397B
*1 Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further information about Power
source and Power consumption information.
*2 Only when installation work is properly performed according to the instructions in this book and appropriate waterproof
treatment is performed.
*3 It is impossible to remove the main sunshield.
36
