Lens and pan/tilt head
If a lens and pan/tilt head are not performed for a long
period of time, the grease coating inside these parts may
become sticky. That may obstruct the parts from moving.
To prevent this, move the lens or pan/tilt head periodically.
Or perform position refresh periodically in the manner
described in “Position refresh”.
Position refresh
During the use for a long period of time, the preset posi-
tions may become inaccurate. When “Position refresh” is
set for the created schedule, the camera position will be
corrected periodically.
Refer to the Operating Instructions on the provided CD-ROM
for how to perform the settings.
Tilt angles and the zoom ratio
This product contains a function to prevent image deterio-
ration when using a tilt angle higher than horizontal
(0 ° to -15 °). However, when this product is used at a tilt
angle higher than about -5 °, depending on the zoom rate
used, images may become distorted or the upper parts of
the images may become dark. In this case, adjust the
zoom rate or tilt angle as necessary.
Equipment classification and power source indica-
tion label
Remove the main sunshield rear cover of this product to
refer to the indication label for the equipment classification
and power source, etc.
: Direct current symbol
: Alternating current symbol
12
