Installation
Before starting installation/connection, make sure that the power cable is not connected to the main power supply.
Refer to the “Precautions for installation” section before starting installation/connection. (
☞
page 13)
Step 1
Install the mounting bracket.
When using the ceiling mount bracket (WV-Q121B)
or the wall mount bracket WV-Q122 (option).
Pass the cables from the housing base through the ceiling
mount bracket or the wall mount bracket and connect the
cables from the housing base with the cables from the ceil-
ing or wall. Refer to page 26 for how to connect the cables.
Refer to the installation guide of each bracket for details on
the installation procedure. Take care of the direction to
install the mount bracket so that the camera can be
mounted at the front of the bracket.
When using the mount bracket (custom-made).
The figure shows an example of the camera mounted on
a ceiling with a bracket.
When waterproofing, use waterproof material to fill in gaps
and holes between the attachment pipe and the mount
bracket.
q
Prepare a ceiling mount bracket.
w
Fix the attachment pipe to the bracket.
e
Fill the gap between the bracket and attachment pipe
with waterproof material such as silicon clay.
Attachment pipe
Waterproof material
r
Pass the cables from the housing base through the
mount bracket (custom-made)
t
Connect the cables from the housing base with the
cables from the ceiling or wall. Refer to page 26 for
how to connect the cables.
Step 2
Fix a bracket to the installation surface on the ceiling or
wall by using appropriate bolts, nuts or the like (not sup-
plied).
Step 3
Insert the SD memory card into the SD memory card slot.
Refer to page 18 for how to insert the SD memory card.
Mount bracket
(custom-made)
(fl
58)
(60 mm {2-3/8 inches})
25 mm {31/32 inches}
85 mm {3-11/32 inches}
RP 1-1/2, 11 crest,
deep 30 MAX
(parallel pipe thread)
R 1-1/2, 11crest, deep 30 MAX
(taper pipe thread)
22
