•
If access often fails due to the change in the global address of router, set a smaller value for “Access
interval”.
17.4.4 Checking the information registered for the “Viewnetcam”
service
It is possible to check if the camera has been registered for the “Viewnetcam” service. (
®
page 151)
17.4.5 When using “Dynamic DNS Update”
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•
Available number of characters:
3 - 250 characters
Enter in the form of “(host name). (domain name)”.
•
Default:
None (blank)
Note
•
Refer to the network administrator for further information about the available host names.
[Access interval]
Select the interval to access the Dynamic DNS Update service server to check the IP address and the host
name from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h
•
Default:
24h
17.4.6 When using “Dynamic DNS Update(DHCP)”
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•
Available number of characters:
3 - 250 characters
Enter in the form of “(host name). (domain name)”.
140
Operating Instructions
17 Configuring the network settings [Network]
