![background image](http://html.mh-extra.com/html/panasonic/wv-sud638/wv-sud638_operating-instructions-manual_1511944016.webp)
•
The duration of continuous audio transmission can be configured in the [Audio] tab of the setup
menu. Audio output stops when the specified time has passed. To turn the audio transmission
function on, click the [Audio output] button again.
•
When the camera is restarted, the adjusted volume level (for both the audio transmission and
reception) will return to the level that had been set on the [Audio] tab on the setup menu.
(
®
•
Actual volume level will change in three steps even though the volume cursor can be adjusted
minutely.
Main area
Images from the camera will be displayed in this area.
The current time and date will be displayed according to the settings configured for “Time display format”
and “Date/time display format”. (
®
In addition, when being adjusted, the status of brightness (
®
and the preset ID (
®
page 73) will be displayed as well as the characters configured for “Camera title on
screen” (
®
page 40). The number of lines for the display is 3. Click a desired point in the main area on
the “Live” page that is to be the center of the angle of view. The camera moves to adjust the position in
order to set the clicked point as the center.
When selecting an area in the main area by dragging the
mouse, the selected area will be located at the center of the main area. In this case, the zoom ratio will be
adjusted automatically.
A zoom operation can be performed using the mouse wheel.
When the main area of the “Live” page is right-clicked, “Auto track” starts for the clicked object. Depending
on the targeted object or its surroundings, “Auto track” may not perform normally.
Note
•
When the camera is operated by a user with a low access level, images displayed on the screen
may be changed temporarily. This does not affect operation of the camera.
•
Depending on the PC in use, screen tearing* may occur due to the GDI restrictions of the OS when
the shooting scene drastically changes or when the wiper is in use.
*A phenomenon in which portions of the screen are displayed out of alignment.
*1
Only operable by users whose access level is “1. Administrator”.
*2
Only operable by users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.”
(
®
*3
Operable by users who belong to the access level selected for “Permission level of audio trans./recep.” on the [Audio] tab of the
“Image/Audio” page. Refer to page 93 for the permission level of audio.
*4
As the tilt angle approaches 90°, because the difference between the specified position and the actual direction the camera is moving
increases, the camera may not move to the specified angle of view.
16
Operating Instructions
1 Monitor images on a PC