H.264(1)/H.264(2)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
When “Quad stream” is selected for “Image capture mode”, “H.264 transmission” is always set to “On” and
these selections cannot be selected.
•
On:
Transmits H.264 images.
•
Off:
Does not transmit H.264 images.
•
Default:
On
Note
•
When the “Image capture mode” type is “2 Monitor”,“H.264(1)” displays the Fisheye image, and “H.
264(2)” displays either the Panorama, Double Panorama, or Quad PTZ image.
•
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, displaying of H.264 images
or JPEG images on the “Live” page will become available.
•
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, the transmission interval
of JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On:
H.264 images and audio will be transmitted using the HTTP port. Refer to page 161 for further
information about the HTTP port number settings.
•
Off:
H.264 images and audio will be transmitted using the UDP port.
•
Default:
Off
Note
•
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
•
When “On” is selected, it may take time to start displaying H.264 images.
•
When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
•
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size. The image capture sizes that can be selected depend on “Image capture
mode”. For information on the image capture sizes that can be selected, refer to page 10.
•
Default:
–
H.264(1): Fisheye/2992x2992
–
H.264(2): Fisheye/640x640
[Transmission priority]
Select a transmission priority for H.264 images from the following.
•
Constant bit rate:
H.264 images will be transmitted with the bit rate selected for “Max bit rate (per
client) *”.
•
VBR:
H.264 images will be transmitted with the frame rate selected for “Frame rate*” while maintaining the
image quality level selected in “Image quality”. H.264 images will be transmitted with the bit rate kept within
the maximum bit rate that is set for “Max bit rate (per client)*”. The image quality is fixed, and the recording
capacity changes according to the “Image quality” setting and conditions of the subject. When calculation
of recording capacity is needed in advance, use “Advanced VBR”.
•
Frame rate:
H.264 images will be transmitted with the frame rate selected for “Frame rate*”.
•
Best effort:
In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate
varying between the maximum and minimum bit rates that are set for “Max bit rate (per client)*”.
Operating Instructions
99
11 Configure the settings relating to images and audio [Image/Audio]
