32
n
Mount the camera to the camera mount bracket.
Refer to the operating instructions of the camera mount bracket (locally procured) for informa-
tion on how to mount it.
m
Secure the safety wire to the foundation part of the construction or a part with adequate strength
(minimum pull-out strength 196 N {44 lbf}).
Prepare the fixing screw according to the material of the area where the safety wire is to be fixed.
For mounting on ceiling, use the safety wire, washer (accessory) and spring washer (accessory).
IMPORTANT:
•
The safety wire shall be adjusted to remove slack.
•
Be sure to install the safety wire to prevent a fall of the camera resulting in injury or accidents in
case the camera comes off.
•
To prevent the mounting strength from becoming lower, do not use wooden screws to secure
the safety wire.
Washer (accessory)
Spring washer (accessory)
Recommended screw M4
Minimum pull-out strength 196 N {44 lbf}
Safety wire
(accessory)
<Mounting sample>
Recommended screw M4
Minimum pull-out strength
196N {44 lbf}
Safety wire
(locally procured)
(accessory)
Camera
mount
bracket
Safety wire
(accessory)
Safety wire
(accessory)
Camera mount
bracket
(locally procured)
Camera mount
bracket
(locally procured)
Camera
,
Remove the cover film from the lens.
