31
Mount the camera to the camera mount bracket (locally procured)
Installation shall be conducted after turning off each device.
IMPORTANT:
•
When using the camera mount bracket to mount the camera, make sure to attach the safety
wire (accessory). Ask your dealer for installation.
z
Secure the safety wire lug (accessory) with the wire lug fixing screw (accessory).
Secure the safety wire lug (accessory) as shown in the following illustrations.
If the safety wire lug (accessory) is secured as shown in the not recommended example, it
might get in the way when mounting the camera mount bracket to the camera.
Wire lug fixing screw
(accessory)
Safety wire lug
(accessory)
<Recommend>
Wire lug fixing screw hole
<Not Recommend>
IMPORTANT:
•
Use the wire lug fixing screw (accessory) to attach the safety wire lug (accessory). When
using different length screws, it may damage the camera or cause the camera to fall.
(Recommended tightening torque: 0.39 N·m {0.29 lbf·ft})
x
Engage the safety wire (accessory) with the wire engaging holes respectively.
Wire engaging hole
Safety wire (accessory)
q
Pass the ring part of the safety wire (acces-
sory) through the wire engaging hole.
w
Pass the other end of the safety wire
through the ring part of the safety wire.
c
Remove the sub cover. (
☞
Page 23)
v
Connect the cables to the camera. (
☞
Pages 23 to 27)
As necessary, use a cable tie (accessory) to tie the cables
together and fix them to the camera mount bracket.
IMPORTANT:
•
When fixing the cables with a cable tie, make sure to
leave enough slack where the cables connect to the
camera.
b
Attach the sub cover to the camera. (
☞
Page 30)
(locally procured)
Camera
mount
bracket
Cable tie
(accessory)
Cables
