11.5.6 Configure the VIQS setting
Click the [Setup>>] button of “VIQS” on the [Image/Position] tab of the “Image/Audio” page. (
®
page 100)
VIQS is an abbreviation of Variable Image Quality on Specified area and is a feature that enables you to change
the images of a specified area.
It is possible to enhance the image quality of the specified range within a shooting area (image).
It is also possible to moderate the image data size by lowering the image quality of other areas.
The VIQS setting is available only for H.264 images.
Up to 2 VIQS areas can be set.
When checking the images after configuring the VIQS setting, display the H.264 images on the “Live” page.
Note
•
When “1.3M Quad PTZ [4:3]”, “1.3M Single PTZ [4:3]”, or “VGA Quad streams [4:3]” is selected for
“Image capture mode”, VIQS cannot be used.
•
When Quad PTZ or Single PTZ is selected for 2 Monitor (Max. 15 fps) in the “Image capture mode”
type, VIQS is unavailable, but when “2M Panorama [16:9]” or “2M Double Panorama [16:9]” is selected,
VIQS is available. Additionally, “VIQS” - “H.264(2)” cannot be set.
•
The display images are as follows.
–
When “1.3M Fisheye [4:3]” or “3M Fisheye [4:3]” is selected for “Image capture mode”: Fisheye
images are displayed.
–
When “2M Panorama [16:9]”, “1M Panorama [16:9]”, “Pa Quad PTZ”, or “Pa
Single PTZ” is selected for “Image capture mode”: Panorama images are displayed.
–
When “2M Double Panorama [16:9]”, “1M Double Panorama [16:9]”, “Double Pa Quad
PTZ”, or “Double Pa Single PTZ” is selected for “Image capture mode”: Double Panorama
images are displayed.
[Delete]
Deletes the VIQS area. Click the [Set] button to delete the VIQS area.
[VIQS] - [H.264(1)]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (H.264(1))
images.
•
Default:
Off
Operating Instructions
117
11 Configure the settings relating to images and audio [Image/Audio]
