14
Major operating controls
About the initial set button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 min-
utes after releasing the button. The camera will start up and the settings including the network set-
tings will be initialized. Do not turn off the power of the camera during the process of initialization.
Before initializing the settings, it is recommended to write down the settings in advance.
Dome cover
Dome
Lens
Initial set button
Link indicator
(lit when linking)
Access indicator
(lit when accessing)
Network connector
<Front view>
<Rear view>
