10
[Precautions for use]
This product is designed to be used
indoors. This product is not operable out-
doors.
This product has no power switch.
When turning off the power, turn off a PoE hub
or remove a network cable.
To keep on using with stable performance
Do not use this camera in hot and humid con-
ditions for a long time.
Failure to observe this causes component deg-
radation resulting in life shortening of this prod-
uct.
Do not expose this camera to direct heat
sources such as a heater.
Do not touch the dome with your bare
hands.
A dirty dome causes deterioration of picture
quality.
Handle this camera with care.
Do not drop this camera, nor apply shock or
vibration to this camera.
Failure to observe this may cause trouble.
About the PC monitor
Displaying the same image on a monitor for a
long time may damage the monitor. It is recom-
mended to use a screen-saver.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around 2
minutes after the restart just as when the
power is turned on.
Product disposal/transfer
Data saved on this product or a storage device
used with this product may lead to personal
information leakage.
When it is necessary to dispose or give this
product to someone, even when for repair,
make sure that there is no data on this prod-
uct.
Cleaning this product body
Be sure to turn off the power before cleaning.
Do not use strong abrasive detergent when
cleaning this camera. Otherwise, it may cause
discoloration.
Cleaning the lens
Use a lens cleaning paper (used to clean cam-
era lenses or lenses of spectacles). When
using solvent, use an alcohols solvent and do
not use a thinner or a glass cleaner.
Transmission interval
Image transmission interval may become slow
depending on the network environment, PC
performance, shooting subject, access num-
ber, etc.
Code label
The code labels (accessory) are required at
inquiry for trouble. Use caution not to lose
these labels. It is recommended to paste one
of the labels onto the CD-ROM case.
About the MOS image sensor
•
When continuously shooting a bright light
source such as a spotlight, the color filter
of the MOS image sensor may have deteri-
orated and it may cause discoloration.
Even when changing the fixed shooting
direction after continuously shooting a
spotlight for a certain period, the discolor-
ation may remain.
• When shooting fast-moving subjects or
performing panning/tilting operations,
objects crossing the shooting area may
look to be bending askew.
