•
To access the camera via the Internet by connecting the camera to a router, it is necessary to assign
a respective HTTP port number for each camera and address translation by using the port forwarding
function of the router. For further information, refer to the operating instructions of the router in use.
Router
Internet
(WAN)
Cable modem
XDSL modem
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:50000
A
192.168.0.1:50000
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:50001
A
192.168.0.2:50001
Private address
192.168.0.1
Port number: 50000
Private address
192.168.0.2
Port number: 50001
LAN
Private address
192.168.0.254
WAN
Global address
vvv.xxx.yyy.zzz
Enter [Global IP a :
(colon) + port number] in the
"Address" box of the browser
via the Internet.
vvv.xxx.yyy.zzz:50000
vvv.xxx.yyy.zzz:50001
WV-S
1131
WV-S
1131
[FTP access to camera]
Select “Allow” or “Forbid” to determine whether to allow or forbid the FTP access to camera.
•
Default:
Forbid
2.9.2 Configure advanced network settings [Advanced]
Click the [Advanced] tab on the “Network” page. (
®
The settings related to SMTP (E-mail), FTP, NTP, UPnP, HTTPS, DDNS, SNMP, QoS can be configured in
this section.
You can move to the setting page of a setting item by clicking the corresponding link for that setting item.
156
Operating Instructions
2 Settings
Summary of Contents for WV-S1100 Series
Page 235: ...Operating Instructions 235 Notes ...