Panasonic WV-S1100 Series Operating Instructions Manual Download Page 55

Page: 55 / 236

Refer to page 128 for information about how to configure the above screen.

[Next] button

If you click the [Next] button, the mail setup menu will be displayed. (

page 55)

Note

•

If you click the [Next] button, the setting items in the screen are saved.

[Back] button

If you click the [Back] button, either the FTP transfer setup menu (

page 52), the JPEG recording setup menu

(

page 53), or the video recording setup menu (

page 53) will be displayed.

2.3.2.6 Alarm: configure the mail notifications and mail server

The settings relating to e-mail can be configured in this section.

Operating Instructions

2 Settings

Summary of Contents for WV-S1100 Series













































































































































































































































Search results

Summary of Contents for WV-S1100 Series

Reviews:

Brands by name

Popular brands

Panasonic WV-S1100 Series, Operating Instructions Manual

Search results

Summary of Contents for WV-S1100 Series

Reviews:

Brands by name

Popular brands