manualshive.com logo in svg

Panasonic WV-S1100 Series, Operating Instructions Manual

Share
Download
Panasonic WV-S1100 Series Operating Instructions Manual Download Page 14

[Log] button 

S11x2

 

S11x1

 

S15x1

 

S25x1

 

S22x1

 

S21x1

When the [Log] button is clicked, the log list will be displayed and images saved on the SD memory card
can be played.
Refer to page 31 for further information about the log list and for how to play images on the SD memory
card.

RS485(pan/tilt head) 

S11x2

This button is available only when the [RS485 operation screen] in the [RS485] tab is set to “On(pan/tilt
head)”. (

®

page 204) If you click the button, the screen to control the pan/tilt head will be displayed.

IMPORTANT

•

Depending on the pan/tilt head connected to, some functions may not be available. Refer to the
specifications of your pan/tilt head for more information. Refer to the operating instructions of the
pan/tilt head for further information about its operation.

[Viewer Software] button

Starts installation of the viewer software for display. This button will not be available if the viewer software
is already installed on the PC, or if the “Automatic installation” of the [Viewer software
(nwcv4Ssetup.exe)] in the [Basic] tab is set to “Off”. (

®

page 67)

Camera title

The camera title entered for “Camera title” on the [Basic] tab will be displayed. (

®

page 63)

Support button

When this button is clicked, the support site below will be displayed in a newly opened window. This website
contains technical information, FAQ, and other information.
http://security.panasonic.com/support/

Alarm occurrence indication button

*2

When an alarm occurs, the display flashes. When this button is clicked, the output terminal will be reset
and this button will disappear. (

®

page 27)

Note

•

Since the blinking of the alarm occurrence indication button is not coupled to recording images to
the SD memory card, forwarding E-mails, or other operations, check the settings of each operation
separately.

Full screen button

Images will be displayed on a full screen. If the full screen button is clicked once when the image displayed
in the main area is smaller than the main area, the image is displayed corresponding to its image capture
size. If the full screen button is clicked once when images are displayed corresponding to their image
capture sizes, images are displayed in full screen. To return to the “Live” page when displaying an image
in full screen, press the [Esc] key.

Snap shot button

Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the
image on the PC by selecting “Save” from the displayed pop-up menu.
When “Print” is selected, printer output is enabled.

14

Operating Instructions

1 Operations

Summary of Contents for WV-S1100 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands