49
Configure the settings relating to the authentication
[Authentication setup]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-
figured on this page.
The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the "Authentication setup" page. (
☞
pages 4 and 5: How to display/operate the setup menu)
The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered.
Note:
When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IP
address (PC), access to the camera will be denied for a while.
[User authentication]
Select "ON" or "OFF" to determine whether or not to
authenticate the users.
Default:
OFF
[User name]
Enter a user name.
Number of characters for the user name:
1 - 32 char-
acters
Default:
None (blank)
[Password] [Retype password]
Enter the password.
Number of characters for the password:
4 - 32 char-
acters
Default:
None (blank)
Note:
When the user name already in use is entered and
the [SET] button is clicked, the respective user infor-
mation will be overwritten.
[Access level]
Select the access level of the user from the following.
1. Administrator:
Allowed all available operations of
the camera.
2. Camera control:
Allowed to display images from the
camera and to control the camera. The camera set-
ting configuration is unavailable.
3. Live only:
Only displaying live images is available.
The camera setting configuration and camera con-
trol are unavailable.
Default:
3. Live only
Note:
By clicking [
i
] of "User name check", the registered
user can be selected and the selected user’s infor-
mation can be checked.
The registered user will be displayed with the access
level. (Example: admin [1])
To delete the registered user, click the [DEL] button
after selecting the user to be deleted.
Important:
If all users whose access level is "1. Administrator"
are deleted, it will be impossible to configure the set-
tings.
