43
Inst
allation
2
Remove the accessory box, two
stands and four cushions (upper).
Note
•
Be careful not to damage the whiteboard.
3
Remove the two transportation
plates.
Remove the two screws using the hexagonal
wrench, and remove the transportation plate.
In the same way, remove the other side
transportation plate.
Note
•
Can not attach the stands without removing
the transportation plates.
4
Put the unit on the cushions
(lower).
1) Lift the bottom (control box side) of the unit
frame, and shift it 300 mm (1
3
/
16
"
) to
400 mm (1
9
/
16
"
) and place it on the cushion
(lower).
2) Remove the band holding the slider in.
Transportation plate
300 mm–400 mm
(1
3
/
16
"
–1
9
/
16
"
)
Band
Control box