Setting the Unit
21
Using
By performing the Test Print feature, it is possible to
clean the printer head from this unit when scanned
images are not printed correctly (ex. certain areas
appear blank).
Once the printer head is cleaned, the following pattern
will be printed.
If the pattern is printed as shown below, the problem
has been fixed. If the pattern is not printed as shown
below, refer to the manual of the printer for details.
Note
•
This item is only be displayed when an external
printer is connected to the unit.
1
Press the Set-up Key
.
•
The set-up screen is displayed.
2
For UB-2815C, press the Set-up Key (
)
4 times.
For UB-2315C, press the Set-up Key (
)
3 times.
•
The Test Print feature is selected.
3
Press the Multi-Copy Key (
).
•
The printer head is cleaned and the pattern
shown above is printed.
4
Press the Mode Key (
) to return to standby
mode.
Testing the Printer