Specifications
Settings and Printing
Network
Maintenance and Spec.
Maintenance and Spec.
86
!
Paper Specifications
This printer is designed to work well with most types of paper. However, differences in paper may have
significant effects on the quality of the print or the reliability of paper handling. It is strongly
recommended that you always test paper before purchasing it to make sure it provides desirable
performance. The following guidelines will be helpful.
Basic Weight:
60 to 105
g
/m
2
(16 to 28 lb.)
Thickness:
3.7 to 7.5 mils (1 mil=1/100
0″
)
Moisture Content:
4% to 6%
Smoothness:
100 to 300 Sheffield
Acid Content:
5.5 PH minimum
Fusing Compatibility:
Must not scorch, melt, offset material, or release hazardous emissions when heated to 200°C (392°F)
for 0.1 second
Cutting Dimensions:
±0.0313 inch of nominal, corners 90°±4°
Grain:
Long grain
Cut Edge Conditions:
Cut with sharp blades, no paper dust
Ash Content:
Not to exceed 10%
Curl:
No allowable curl toward the side to be printed
Packing:
Polylaminated moisture proof ream wrap
NOTE:
• Please store your paper according to the recommendations of the manufacturer.
Media
