manualshive.com logo in svg

Panasonic WORKIO DP-CL21, Maintenance And Specifications

Share
Download
Panasonic WORKIO DP-CL21 Maintenance And Specifications Download Page 7

Cleaning the Printer

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

7

Periodic cleaning of the printer is recommended. The frequency of cleaning is dependent upon the 
environment in which the printer is used. You should clean the printer:

• At least once a month.
• When the printer experiences frequent media jams.
• When print quality has become deteriorated.

1

Turn the power OFF.

2

Clean all the covers with a soft cloth. Use any mild commercial cleaner.

CAUTION

• Do not use benzene, thinner, aerosol cleaners, or any abrasive powder.

When using isopropyl alcohol with a lint-free cloth, make sure that the alcohol is at least 90% pure, 
obtainable from your local pharmacy. (Do not use rubbing alcohol; it can damage the printer.)

NOTE:

• If using the multi-purpose tray or opening the tray cover, be sure to push the multi-purpose tray and 

close the tray cover before you pull the media tray out of the printer or open the front door.

Cleaning the Printer

External

Internal

1

2

Summary of Contents for WORKIO DP-CL21








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands