manualshive.com logo in svg

Panasonic WORKIO DP-CL21, Maintenance And Specifications

Share
Download
Panasonic WORKIO DP-CL21 Maintenance And Specifications Download Page 6

User Replaceable Components

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

6

The following upgrade options can be installed in the printer.
Please contact the reseller from which the printer was purchased.

CLHD20: Hard Disk Drive (20 GB 2.5") 

The Check and Print, Memory Print, and Confidential Print (PCL printer driver only) are available 
in Windows only  (not available in Macintosh) by installing this option.
Refer to the installation manual included in the option's carton to install it.

DA-DS1: Optional Paper Feeder

An additional cassette can be used by installing this option. This option can be installed up to two 
units. Refer to the installation manual included in the option's carton to install it.

CLEM256: 256MB DIMM (Optional Memory)

It is strongly recommended to install this option if printing documents in Enhance mode or Duplex 
mode. If the printer is not equipped with the optional memory, the Memory Overflow error may 
occur and it causes the deterioration of the image quality. Refer to the installation manual included 
in the option's carton to install it.

DA-MC1: Upgrade Kit (for PostScript 3)

Printing for PostScript is available from Windows or Macintosh by installing this option.
This option is for DP-CL21P only.
Refer to the installation manual included in the option's carton to install it.

Upgrade Options

Summary of Contents for WORKIO DP-CL21








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands