![background image](http://html1.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_maintenance-and-specifications_3656204053.webp)
Warning / Printer Error Messages
Settings and Printing
Network
Maintenance and Spec.
Maintenance and Spec.
53
TR Replace
Transfer roller is worn out.
Replace the transfer roller.
FSR wearing out
Fuser unit is wearing out.
Have the fuser unit available.
FSR Replace
Fuser unit is worn out.
Replace the fuser unit.
Tray1 Empty
Tray 1 is empty.
Load media in the tray 1.
Tray1 not installed
Tray 1 is not installed.
Install tray 1.
Tray2 Empty
Tray 2 is empty.
Load media in tray 2.
Tray2 not installed
Tray 2 is not installed.
Install tray 2.
Tray3 Empty
Tray 3 is empty.
Load media in tray 3.
Tray3 not installed
Tray 3 is not installed.
Install tray 3.
HDD Full
Hard disk drive is full.
Remove unnecessary files from
the hard disk drive.
HDD I/O Error
HDD I/O error has occurred.
Perform Check Disk operation in
the HDD Maintenance mode.
If it still remains, perform Quick
Format or HDD Format operation
in the HDD Maintenance mode.
(
see “Using the HDD
Maintenance Mode” on page 76
in “Settings and Printing).
Adjusting for media
At continuous printing fuser
temperature is higher than
predetermined temperature.
The printing is stopped
automatically until the fuser
temperature is lower than the
predetermined temperature.
Warning Message
Possible Cause
Corrective Action